Neblineros

[Claiminglotus]

Hola tengo un suzuki swift o en mi pais se lo conoce como forsa 2 motor 1.0 y quiero saber como hacer la coneccion para colocar neblineros, tengo el boton y encontre el socket abajo del tablero, pero no se a donde seguir la coneccion y que le falta

 

[macuserman]

Hola tengo un suzuki swift o en mi pais se lo conoce como forsa 2 motor 1.0 y quiero saber como hacer la coneccion para colocar neblineros, tengo el boton y encontre el socket abajo del tablero, pero no se a donde seguir la coneccion y que le falta

Hmm well most of us speak english here, but I used google translator and came up with this:

Hello I have a Suzuki Swift or in my country it is known as Forsa 2 Motor 1.0 and I want to know how to make the connection to place foggers, I have the button and found the socket below the board, but I do not know where to follow the connection and that lack

I'm not sure if that's a perfect translation, probably not, but either way welcome to the forum, might be challenging with the language difference. But we'll do our best to help you, I've never had a MK1 so I'm not sure exactly how that wiring is done. Maybe someone else will chime in soon. :smile: Anyhow welcome!

 

[Claiminglotus]

Well, I will try to write with the translator in English to provide us, it is really a mk2, in my country it went on sale with the 1000 engine, which in the other countries is 1300 engine, I found the yellow socket, connect a button like the defroster and if you turn on the lamp of courtesy and if preciono turns on the light that indicates that it is in operation, the problem is that I do not know if a fuse is missing in the connection, since they do not light the foggers

 

[pilkguns]

What country are you in? Are those glass headlights?

 

[t3ragtop]

There is a very big difference between the wiring harnesses for a 1.0 engine and a DOHC 16v engine and that is probably the issue here.

The DOHC 16v front wiring harness has provisions for the aux lamps, the front wiring harness of the 1 liter car does not.

The GT car has a driving light power relay mounted under the dash next to the steering column that is not there on the g10 cars. Also, the 1 liter cars won't have the wiring to the aux lights to plug them in.

You can add all the wiring or you can re-wire them to work.

 

[Claiminglotus]

I guess some part of the wiring is missing, but the button of the foggers connects it to the harness and lights a guide light when putting lights on the board, and if I press the button this implies that it sends a signal of operation, I will review the rele mentioned, maybe I need that.
Thank you

 

[t3ragtop]

It has been years since I went through the oem switch to identify the wiring but I recall that there was a section separate from the function of switching on the actual lights that just switched the "on" indicator lamp.

The relay you will be looking for is round, about 20mm in diameter, and about same in height. I believe that it is a light gray in color. It will be under the dash just off the center line of the steering column.

 

[Daniel]

You can add all the wiring or you can re-wire them to work.