Search found 618 matches

 Return to the advanced search

Re: MK1 G10T Plug and Play Fuel Cut Solution

 by GT4LIFE ¦  Thu Sep 01, 2022 9:41 pm ¦  Forum: General ¦  Topic: MK1 G10T Plug and Play Fuel Cut Solution ¦  Replies: 16 ¦  Views: 4273

You can do what you want, and yes I have a wideband o2 sensor in my car that needs it. On my Probe GT turbo chip which runs a VAF and has fuel cut in the same way they just changed the code on the stock OBDI chip. What I'm saying is there are still a few guys out there that have the hard ware to fla...

Re: 93 Swift Chevy Turbo

 by GT4LIFE ¦  Thu Sep 01, 2022 1:22 am ¦  Forum: Car Builds & Projects ¦  Topic: 93 Swift Chevy Turbo ¦  Replies: 5 ¦  Views: 286

The stock air box is not in place, and there is an aftermarket air filter and adapter that attaches to the VAF. I don't plan on touching the VAF in this car. What I was referring to is the GTi MAF requires a lot more thought to modifying/ building it into a turbo system than the VAF. I know more tha...

Re: MK1 G10T Plug and Play Fuel Cut Solution

 by GT4LIFE ¦  Tue Aug 30, 2022 11:34 am ¦  Forum: General ¦  Topic: MK1 G10T Plug and Play Fuel Cut Solution ¦  Replies: 16 ¦  Views: 4273

I don't know anything about MK1 stuff, but fuel cut sucks. Is the VAF just sending a signal to the ECU when it is open all the way? I remember on my mx6/probe GTs that people would do a VAF hack to trick the ECU in thinking it wasn't open all the way. I don't recommend even with a functional wideban...

Re: 93 Swift Chevy Turbo

 by GT4LIFE ¦  Mon Aug 29, 2022 11:02 pm ¦  Forum: Car Builds & Projects ¦  Topic: 93 Swift Chevy Turbo ¦  Replies: 5 ¦  Views: 286

I was looking at the stock air box today and was thinking about returning it to stock. I think I'm missing the 90 degree elbow out the right fender. I don't like the small air-inlet with the double 90 degrees. I appreciate the photos you posted since they confirmed how I thought it was installed. I ...

93 Swift Chevy Turbo

 by GT4LIFE ¦  Sun Aug 28, 2022 11:52 pm ¦  Forum: Car Builds & Projects ¦  Topic: 93 Swift Chevy Turbo ¦  Replies: 5 ¦  Views: 286

I purchased a 93 Swift with a Chevy Sprint Turbo system completely installed. It was John P's car from Teamswift. Other than a few things this one as far as engine will remain the same. I switched out to all 14" wheels (steelies). This will be my back up commuter. It has AC, and gets better gas mile...

Re: 92 Black GT

 by GT4LIFE ¦  Thu Aug 18, 2022 11:15 am ¦  Forum: Car Builds & Projects ¦  Topic: 92 Black GT ¦  Replies: 367 ¦  Views: 277775

i have had the same issues with many hid / led kits, having to swap pins in the sockets to get the headlamps to work properly with the wiring on these cars. i also do the relay mod while i am in there doing the headlamps. less electrical stress on the small oem wiring..... It is only three wires, a...

Re: 92 Black GT

 by GT4LIFE ¦  Fri Jul 29, 2022 12:09 am ¦  Forum: Car Builds & Projects ¦  Topic: 92 Black GT ¦  Replies: 367 ¦  Views: 277775

I sorted a few loose ends today. My new Race Sport lifetime ballast HID were having issues with the high beams not working with the bi-xenon bulbs. The harness came plugged in the wrong way and a little swapping around of the pins and now they're functioning correctly. I fixed an annoying misting of...

Re: Lug Nuts

 by GT4LIFE ¦  Tue Jul 26, 2022 10:24 am ¦  Forum: Suspension ¦  Topic: Lug Nuts ¦  Replies: 11 ¦  Views: 5344

They all peel or rust eventually. Specially if over torqued with an impact gun. I never touch my lug nuts with an impact gun. When I go to any tire place I let them know that if they use an impact gun they will be replacing the lug nuts. I still watch. They anodize the dura aluminum so they resist ...

Re: Lug Nuts

 by GT4LIFE ¦  Mon Jul 25, 2022 1:26 pm ¦  Forum: Suspension ¦  Topic: Lug Nuts ¦  Replies: 11 ¦  Views: 5344

I know this post is from 2018 but I thought I would add to it. I am running Rays Dura Nut Lug Nuts: (they go perfectly with my Volk Rays wheels; maybe because they were made for them, and I'm also running ARP 12 mm x 1.5 wheel studs which I guarantee will out perform the stock 10 mm Metro studs.) De...

Re: 92 Black GT

 by GT4LIFE ¦  Mon Jul 25, 2022 10:20 am ¦  Forum: Car Builds & Projects ¦  Topic: 92 Black GT ¦  Replies: 367 ¦  Views: 277775

I completed the first few test drives and had her back up and running yesterday. The ball bearing turbo sounds like a small jet engine with the larger air intake. I will have to tweak the idle and the blow off valve a little but she ran pretty sweat! The Tial external wastegate with an 8 lbs spring ...

  • 1
  • 2
  • 3
  • 4
  • 5
  • 62
Engine

Turbo power plant Is there a preferred head gas[…]

93 GT for $4200 in Florida

This car looks to be in very nice condition. http[…]

What did you do to your Swift today

I have a pair of '87 calipers wich I will not use[…]

'87 Suzuki Swift commercial

Do you also have an empty trunk :-D My silver p[…]