Search found 518 matches

 Return to the advanced search

Re: 92 Black GT

 by GT4LIFE ¦  Tue Oct 26, 2021 9:13 pm ¦  Forum: Car Builds & Projects ¦  Topic: 92 Black GT ¦  Replies: 289 ¦  Views: 223121

I test fitted the rear system with the emergency brake brackets. They will not fit in the vertical position that I hoped but will fit to the rear. I will be able to use one of the screw holes and then I need to drill two new holes. One going through to the rear hub/spindle and one drill and tapped i...

Re: My 1992 rebuild album

 by GT4LIFE ¦  Wed Oct 20, 2021 8:15 am ¦  Forum: Car Builds & Projects ¦  Topic: My 1992 rebuild album ¦  Replies: 28 ¦  Views: 3971

Keep at it. Good to see it coming back together.

Re: 92 Black GT

 by GT4LIFE ¦  Wed Oct 20, 2021 12:47 am ¦  Forum: Car Builds & Projects ¦  Topic: 92 Black GT ¦  Replies: 289 ¦  Views: 223121

I got the new rear caliper on, but didn’t get a chance to bleed the system.

My rear e brake caliper brackets are on their way. This means I can finally complete the rear Wilwood system I hope.

Re: 89' GTi from Iowa, parts car?

 by GT4LIFE ¦  Wed Oct 20, 2021 12:43 am ¦  Forum: Car Builds & Projects ¦  Topic: 89' GTi from Iowa, parts car? ¦  Replies: 27 ¦  Views: 10618

Here are the pictures of the install:

Image

I had to widen the slot so as I brought the other side out it would still fit the 6 mm screw
Image

Image

Re: 92 Black GT

 by GT4LIFE ¦  Mon Oct 18, 2021 10:39 pm ¦  Forum: Car Builds & Projects ¦  Topic: 92 Black GT ¦  Replies: 289 ¦  Views: 223121

I have most of the last few things installed including new master cylinder, koni yellow rear struts, re-lubed all rear poly bushings, exhaust 6" flex pipe, and fixed air bag on passenger side. When I took apart the left rear I discover that the caliper had failed. I bought a remanufactured from Rock...

Re: 89' GTi from Iowa, parts car?

 by GT4LIFE ¦  Wed Oct 13, 2021 8:33 am ¦  Forum: Car Builds & Projects ¦  Topic: 89' GTi from Iowa, parts car? ¦  Replies: 27 ¦  Views: 10618

I just got the right size ends to go from whatever positive terminal on the battery post to the 6 mm bolt above. I spaced out the whole fuse box about 1/2" further from the fender wall to increase clearances. I used a company called batterycables USA. You can get a whole bunch of lengths with differ...

Re: A story about a 1989 Swift GTI

 by GT4LIFE ¦  Sat Oct 09, 2021 11:03 am ¦  Forum: Car Builds & Projects ¦  Topic: A story about a 1989 Swift GTI ¦  Replies: 4 ¦  Views: 3838

Good save! Sun roof would be nice.

Re: Redlinegti?

 by GT4LIFE ¦  Thu Sep 23, 2021 8:51 pm ¦  Forum: General Swift Chatter ¦  Topic: Redlinegti? ¦  Replies: 16 ¦  Views: 3004

I saw yesterday that it was down. Hopefully it will come back.

Re: Casper 2.0

 by GT4LIFE ¦  Sat Sep 18, 2021 9:24 pm ¦  Forum: Car Builds & Projects ¦  Topic: Casper 2.0 ¦  Replies: 272 ¦  Views: 184918

What is different from the stock setup? Did you shave the block or head? Old fuel pump?

Re: 92 Black GT

 by GT4LIFE ¦  Thu Sep 16, 2021 11:51 pm ¦  Forum: Car Builds & Projects ¦  Topic: 92 Black GT ¦  Replies: 289 ¦  Views: 223121

I got the Yokohama ADVAN Neova AD08 R 205 50 R15 on tonight. They cleared the insides front and back and didn't hit fully locked in the front. However I will need to roll the fenders in the front and back to prevent rubbing on corners. They're barely wider then the 195 50 R15 BFGoodrich g-Force Spor...

  • 1
  • 2
  • 3
  • 4
  • 5
  • 52
new job

that other mower he brought back, that wouldnt run[…]

Breezy

https://youtu.be/RdAPlKEsUsA

92 Black GT

I test fitted the rear system with the emergency b[…]

Casper 2.0

Love the alliteration there! :-)