• User avatar
  • User avatar
  • User avatar
User avatar
By top [email protected]
Avatar
#8460
I was going to pull the steering wheel on my ’93 GT but could not get the horn button to come off. I’ve never had to pull a Mk3 wheel so I’m wondering what the trick is.
User avatar
By suzukitom
Posts Avatar
#8461
1 or 2 blunt butter knives.. use to pry up on edges of recessed round button cover.. should just pop off
Image
User avatar
By top [email protected]
Avatar
#8462
Thanks Tom,

That would be my usual method but I used a hooked pick and I could not get it to come off. Ivan’s FB group gave me a response to push in and turn counter clockwise. I’ll try that, then the dull knives.
User avatar
By suzukitom
Posts Avatar
#8464
wow I learned something today too.


my Cultus button pried off with a knife.. but that was only because it wasn’t turn and locked in place like you said. Now the logo lines up properly.. :-o

pictures below
Image

spring loaded white discs lock into 3 holes when round horn button is pressed in and then turned counterclockwise. spring pressure pops off button.
Image
User avatar
By top [email protected]
Avatar
#8470
Beautiful. Thanks for the pics Tom.
macuserman liked this
User avatar
By macuserman
Avatar
#8471
Thanks for coming here and posting this stuff to the forum so that it is preserved. ;)
What did you do to your Swift today

bought more parts....a running, somewhat driving […]

RZCrew Garage Intakes

A word to the wise. SRD are rip off artist. Avoid[…]

92 Black GT

I tighten my alternator today, cleaned down the ca[…]

new job

:-o wow :-o i wrote a small list of items for t[…]